---
title: Heat Stregthened Glass
description: "![breakage pattern](https://metalco.epikouros.events/_images/products/Tempered/heat.jpg) ### Description - Like thermally toughened glass, heat-strengthened glass is treated using a method of controlled heating and cooling which locks the surface of the glass in a state of compression - This method produces a glass with…"
url: "https://metalcoglazing.com/products-docs/heat-stregthened-glass/"
updated: "2024-05-23"
category: TEMPERED GLASS / Heat Strengthened Glass
---

# Heat Stregthened Glass

![breakage pattern](https://metalco.epikouros.events/_images/products/Tempered/heat.jpg)

### Description

- Like thermally toughened glass, heat-strengthened glass is treated using a method of controlled heating and cooling which locks the surface of the glass in a state of compression
- This method produces a glass with a bending resistance greater than that of annealed glass but less than that of thermally toughened glass since the glass is cooled more slowly. Heat-strengthened glass does not require heat soaking
- Virtually all types of glasses may be heatstrengthened: clear and coloured Planibel, Stopsol, Sunergy, Imagin and so on
- Some types of glasses with magnetron coatings are also available in a heat-strengthened version; this requires a few adjustments to the thermal-toughening processes
- Heat-strengthening can be combined with silk-screen printing or enamelling
- Use: single glazing, insulating glazing, laminated glazing and so on – primarily for applications where:
  - the risk of the glass breaking due to thermal shock (particularly with solar control glasses or those with a higher level of energy absorption) is too high
  - the resistance of the glass to breakage by bending of a maximum of 70 N/mm² is considered sufficient
- Once treated, heat-strengthened glasses cannot be sawn, cut, drilled or processed
- Heat strengthened glass complies with standard EN 1863

#### Comments

- Spontaneous breaking Heat-strengthened glasses do not suffer spontaneous breakage due to nickel sulphide inclusions. Heat-strengthened glasses do not need to be heat-soaked in advance.
- Optical performance
  - Optical distortion The thermal toughening process causes the surface of the glass to distort in two ways: - overall bend of 3 mm/m* - localised bend of 0.3 mm/300 mm* * values for heat-strengthened glass using the horizontal process
  - Interference Heat-strengthened glasses cause interference in the same way as thermally toughened glass.